DigiPlus Philippine

List of the table of contents of this article:

• 1,DigiPlus Philippine What is a ladder control system?
• 2, Ladder control What does the system mean
• 3, Working principle and function of elevator controller
• 4, What is the intelligent IC card elevator control system

What is a ladder control system?

1. What does the ladder control system mean? The so-called "ladder control" means that a device similar to "entry control" is installed on the original elevator. As long as you swipe it once, it will automatically turn on and take the user to the floor you want to reach.

2. Ladder control means an elevator control technology. A system device similar to "entry control" is installed on the original elevator. Only after swiping the card will the elevator start and send the owner to the floor he wants to reach. With the rapid development of biometric technology in China, "biometric technology" has been applied to ladder control systems.

3. Escalator control is an elevator control technology. A system device similar to "entry control" is installed on the original elevator. Only after swiping the card will the elevator start and send the owner to the floor he wants to reach.A complete ladder control system consists of five plates: controller, card reader, card issuer, card and elevator management software.

4. Elevator elevator control refers to adjusting the elevator's up and down and switching doors through the control system during the operation process to ensure the safe and smooth operation of the elevator. The ladder control system mainly consists of three parts: electrical, mechanical and software control.

What does ladder control system mean

The ladder control system is an elevator control system. You need to swipe your card to take the elevator, which is equivalent to an access control system. In addition, there are also facial recognition ladder control system, fingerprint recognition ladder control system, iris recognition ladder Control system, if the card is lost, it needs to be reported in time to avoid affecting the normal use experience.

Ladder control means an elevator control technology. A system device similar to "entrance control" is installed on the original elevator. Only after swiping the card will the elevator start and send the owner to the floor he wants to reach. With the rapid development of biometric technology in China, "biometric technology" has been applied to ladder control systems.

Ladder control is an elevator control technology. A system device similar to "entry control" is installed on the original elevator. Only after swiping the card will the elevator start and send the owner to the floor he wants to reach. A complete ladder control system consists of five plates: controller, card reader, card issuer, card and elevator management software.

Elevator ladder control refers to adjusting the elevator's up and down and opening and closing doors through the control system during the operation process to ensure the safe and smooth operation of the elevator.The ladder control system mainly consists of three parts: electrical, mechanical and software control.

working principle and function of elevator controller

1. The photoelectric flat layer sensor converts the displacement of the car into an optical signal, emits it through the light-emitting diode (special) on the guide rail, and receives the diode and detection circuit in real time. Detect the intensity of the light reflected back on the guide rail. When the sensor touches the light barrier, the intensity of the reflected light decreases.

2. Elevator control system structure The elevator control system hardware is composed of a car control plate, a hall door signal, a PLC, a frequency converter and a speed control system. The frequency converter only completes the speed control function, and the logic control part is completed by PLC.

3. ● The main function of the electrical control system is to operate and control the operation of the elevator.The electrical control system is mainly composed of a control device, a position display device, a control panel (cabinet), a leveling device and a layer selector. ● The function of the safety protection system is to ensure the safe use of the elevator and prevent all accidents that endanger personal safety.

4. Floor door: for passengers to conveniently enter and exit the elevator. Ladder display: display the number of floors. Floor station escalator button: for passengers to indicate to go up and down the stairs. Introduction to the working principle of the elevator. Through the introduction of each structure of the elevator above, you can know that the elevator is driven up and down through the steel wire rope in the box.

5. Edit this section of the elevator control system - the principle The hardware of the elevator control system is composed of the car control plate, the hall door signal, the PLC, the frequency converter and the speed control system. The frequency converter only completes the speed regulation function, and the logic control part is completed by the PLC.

What is the intelligent IC card elevator elevator control system

The full name of the elevator control system is intelligent elevator IC card control system. The elevator control system is an IC card controller installed outside the elevator car and hall, installed in the management center. It is composed of IC cards held by users of IC card issuing centers and elevators.

What does the ladder control system mean? The so-called "ladder control" means that a device similar to "en access control" is installed on the original elevator. As long as you brush it once, it will automatically turn on and take the user to the floor you want to reach.

The ladder control system, also known as the intelligent elevator control system, is an intelligent management system that adopts advanced card reading and writing technology, automatic control technology and sensing technology, and uses the computer network platform to comprehensively automate the use of elevators.

Prospect photoelectric elevator IC card - economical configuration: main controller I smart card II main functions: 1 swipe the card to use the elevator; 2 shield idle personnel; 3 VIP floor control 4 convenient installation, fast debugging, convenient use.

The card reading module and the function expansion module constitute the elevator control unit. After the cardholder reads the card in the elevator, the system allows the cardholder to reach the authorized floor according to the prior settings. If the cardholder operates the unauthorized floor button, the elevator will not respond. Non-cardholders cannot operate the elevator.